No tiene artículos en su carrito de compras.

Total: 0,00 €

Hertz H604

Más vistas

-16 %

Hertz H604

Sea el primero en dejar una reseña para este producto

Precio Habitual: 199,00 €

Special Price 169,00 €

Amplificador 4 Canales
Classe A/B
4x110 Watios RMS a 4ohm
Modo Puente 2x330 Watios RMS
Con THD 10%
Entrada de Alta 2/4 Canales
Auto Run
Crossover LP/HP
HP Front: 50 ÷ 500 Hz
HP Rear: 50 ÷ 500 Hz
LP Rear: 50 ÷ 500 Hz
Dimensiones 223x51x365 mm

Detalles

INPUTS/OUTPUTS/FILTERS
Inputs: Pre IN / Speaker IN
Input Mode: 2Ch / 4Ch
Filter Selection: Front: Full-HiPass Rear: Full-HiPass-LoPass
Frequency Adjustment:
HP Front: 50 ÷ 500 Hz
HP Rear: 50 ÷ 500 Hz
LP Rear: 50 ÷ 500 Hz
Crossover Slope: 12dB/ott
Bass Boost 45Hz selectable: 0 /+6 /+12 dB
POWER SUPPLY
Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 30 A
Idling current: 0.9 A
Switched off current: 15 uA
Remote In: 4 V ÷ 15 VDC ( 1,3 mA)
Automatic Remote Turn on /off with
Speaker-In Yes
Consumption @ 2Ω, 14,4 VDC (Max
Musical Power): 33 A
SIZE / WEIGHT
W x H x D mm/inch 223 x 51 x 365 / 8.77 x 2.00 x 14.37
Weight (kg/lb): 3,5 / 7.16

POWER SUPPLY
Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 30 A
Idling current: 0.9 A
Switched off current: 15 uA
Remote In: 4 V ÷ 15 VDC ( 1,3 mA)
Automatic Remote Turn on /off with
Speaker-In Yes
Consumption @ 2Ω, 14,4 VDC (Max
Musical Power): 33 A
SIZE / WEIGHT
W x H x D mm/inch 223 x 51 x 365 / 8.77 x 2.00 x 14.37
Weight (kg/lb): 3,5 / 7.16
AMPLIFIER STAGE
Damping factor (1kHz @4Ω): 100
Distortion - THD (100 Hz @4Ω): 0,040%
Bandwidth: 10 Hz ÷ 50 kHz
S/N ratio (A weighted @ 1 V): 95
Pre-In sensitivity: 0.2 ÷ 5 VRSM
Speaker-In sensitivity: 0.8 ÷ 20 VRMS
Load impedance (MIN)
@ 4 Ch:
@ 3 Ch:
@ 2 Ch:

2Ω + 2Ω + 4Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
85 W x 4 (4Ω)
82 W x 2 (2Ω) + 260 W x 1 (4Ω)
260 W x 2 (4Ω)
130 W x 4 (2Ω)
130 W x 2 (2Ω) + 250 W x 1 (4Ω)

Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
All Specifications Subject to Change Without Notice_17.A
1
www.hertzaudiovideo.com
H 604 4 CHANNELS AB CLASS
AMPLIFIER
1280 W
1. High-power AB class output stage, 2 Ω stable, with over-sized power supply.
2. Sophisticated design with exclusive metallic gray-blue finish and wide
heat-sinking surface.
3. Differential input circuitry for increased rejection of electromagnetic
interferences.
4. Bass Boost (45 Hz) adjustable at 0 / +6 / +12 dB, for greater impact on low
frequencies.
5. ART (Automatic Remote Turn-On/Off) turn on/off controlled by the source,
via high-level inputs.
6. Mono operating mode to create a three-channel sub+front system or a
powerful two-channel system.
7. 12 dB/Oct crossover filters. Integrated Lo-Pass and Hi-Pass
(from 50 to 500 Hz), to set up a wide range of systems solutions.
INPUTS/OUTPUTS/FILTERS
Inputs: Pre IN / Speaker IN
Input Mode: 2Ch / 4Ch
Filter Selection: Front: Full-HiPass Rear: Full-HiPass-LoPass
Frequency Adjustment:
HP Front: 50 ÷ 500 Hz
HP Rear: 50 ÷ 500 Hz
LP Rear: 50 ÷ 500 Hz
Crossover Slope: 12dB/ott
Bass Boost 45Hz selectable: 0 /+6 /+12 dB
POWER SUPPLY
Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 30 A
Idling current: 0.9 A
Switched off current: 15 uA
Remote In: 4 V ÷ 15 VDC ( 1,3 mA)
Automatic Remote Turn on /off with
Speaker-In Yes
Consumption @ 2Ω, 14,4 VDC (Max
Musical Power): 33 A
SIZE / WEIGHT
W x H x D mm/inch 223 x 51 x 365 / 8.77 x 2.00 x 14.37
Weight (kg/lb): 3,5 / 7.16
AMPLIFIER STAGE
Damping factor (1kHz @4Ω): 100
Distortion - THD (100 Hz @4Ω): 0,040%
Bandwidth: 10 Hz ÷ 50 kHz
S/N ratio (A weighted @ 1 V): 95
Pre-In sensitivity: 0.2 ÷ 5 VRSM
Speaker-In sensitivity: 0.8 ÷ 20 VRMS
Load impedance (MIN)
@ 4 Ch:
@ 3 Ch:
@ 2 Ch:

2Ω + 2Ω + 4Ω

Output Power (RMS) @ 14.4 VDC, THD 10%:

110 W x 4 (4Ω)
105 W x 2 (4Ω) + 330 W x 1 (4Ω)
320 W x 2 (4Ω)
160 W x 4 (2Ω)
160 W (2Ω) + 310 W x 1 (4Ω)

Información adicional

Marca Hertz
Tipo Class A/B, High Quality, Profesional
Potencia 400-800 Watios

Opiniones de Cliente

Escribir Tu Propia Opinión

Sólo usuarios registrados pueden escribir sus opiniones. Conéctese o regístrese